Technology that’s engineered, not improvised.
Tautiss designs and installs Control4 smart homes, home cinema, resilient networks and business IT — with qualified electrical work and Microsoft 365 handled by the same team, under one contract.
Four disciplines. One team on site.
Most projects touch all four. Because we don’t subcontract between them, nothing gets lost at the handover — the person who designed your network is the one who commissions your control system.
The trades that usually blame each other work for the same company here.
On a typical integration project, the electrician, the network installer and the AV programmer are three different firms. When the keypad doesn’t fire the circuit, everyone points sideways — and you pay for the meeting.
Tautiss carries all three trades in-house. First-fix wiring, containment and consumer unit work happen on the same drawings as the rack layout and the Control4 programming. One point of responsibility, from chase to commissioning.
Control4 & Crestron design, programming and commissioning. Lighting, audio, video, blinds, door entry.
First & second fix, lighting circuits, containment, EV charging and inspection & testing — to BS 7671.
Structured cabling, UniFi Wi-Fi design, FortiGate security, Microsoft 365 and ongoing managed support.
A South-East London home where one press runs the whole evening.
Whole-house Control4 for a private residence: lighting scenes on engraved keypads, Triad multi-room audio, a Dirac-calibrated 5.4.4 Atmos media room, 2N door entry and UniFi Protect cameras — on one interface, with a keypad by the door that shuts the whole house down.
And at sea: the 40m yacht that loses a firewall and doesn’t notice →
Specified by name, sourced through authorised UK distribution.
We install what we’d put in our own homes, supplied through authorised UK distribution — AWE Europe and ADI Global — so it’s genuine stock with full manufacturer warranty, and firmware support that doesn’t vanish after handover. Control4 work is designed and programmed in-house by a certified engineer.
Every name above has a job — that’s why it’s on the schedule. If a platform isn’t right for your project, we’ll say so and specify what is.
Survey to handover, in four stages.
Survey & design
Site visit, cable routes, coverage planning and load calculations. You get drawings and a fixed, itemised quotation — not a day rate and a shrug.
First fix
Containment, structured cabling and electrical works while walls are open. Every run tested and labelled before a single board goes back on.
Install & commission
Racks built and dressed, equipment configured, scenes programmed. We calibrate, then walk the household or crew through it until it’s obvious.
Document & support
As-built documentation, credentials handed over properly, and remote monitoring if you want us to keep watch. No lock-in — the system is yours.
Documentation is the product. The kit is just where it lives.
Any installer can make a system work on the day. The difference shows two years later, when something needs changing and nobody remembers which cable does what. Every Tautiss project hands over a documentation pack — so the next engineer, even if it isn’t us, starts from drawings instead of guesswork.
As-built drawings
Rack elevations, cable schedules and network topology as installed — not as guessed.
Labelled everything
Both ends of every cable, every patch port, every breaker. Traceable in seconds.
Credentials handover
Admin access in your name from day one. Your system, your accounts, your choice of who maintains it.
Support that answers
Remote monitoring and maintenance plans if you want them — a named engineer, not a queue.
Start with a plan, a photo or a problem.
Send a floor plan, a snag list or a rough idea. We’ll come back within one working day with a clear read on scope, budget and sequencing.